PRO sign-up Get a price

Motorized shades in Buckhead

Buckhead has two kinds of homes: older single-family houses on wooded lots, some dating to the 1920s and 1930s, and high-rise condos. Most projects are retrofits in finished rooms, so wire-free power and a slim fascia are common. A whole house of about 22 shaded openings costs $27,000–42,000 installed. Projects start at $15,000.

The houses and windows of Buckhead

Much of west and north Buckhead is single-family houses in wooded settings. Wealthy Atlantans began building large houses here after World War I and kept building through the 1930s. Near the commercial core, high-rise condo buildings have gone up since the 1980s. We have no survey of Buckhead windows, and an older house can mix window sizes, arched tops and French doors on one side. That is why a project here starts with photos, not assumptions.

Mode Shades fits motorized shades, also called motorized blinds or automated shades, in Buckhead and across metro Atlanta.

What we would put on those windows

WindowShadeSystemInstalled price
Standard window in a finished roomPrivacyFascia, wire-free$895–1,295
BedroomBlackoutFascia, wire-free$1,095–1,495
French doorsSheer, one shade per doorFascia$1,895–2,995
Arched-top windowSheer on the rectangle belowFascia$895–1,295
Wide condo glassDualOpen roll or Fascia$1,795–2,495

Finished rooms, mature trees and retrofits

A finished house changes the system choice. A Pocket means opening the ceiling, so it suits a remodel. Without one, a Fascia or an Open roll mounts on the frame or the wall, and wire-free power avoids new wiring. The mounting guide shows what each looks like. If walls are open for a remodel, run power then; see hardwired vs battery.

Tree cover matters here. A City of Atlanta study estimated the canopy at 47.9% for 2008. A room behind trees may need privacy more than glare control, while a west-facing room in the open needs both.

How it works from here

  1. Photograph each window from inside with your phone and send the set.
  2. We reply with a priced design for every opening.
  3. Then comes a site measure, shades made to measure, and installation.

Photos are enough to begin: get a price for your house.

Questions owners ask

Can motorized shades go into a finished house without new wiring?

Yes. Wire-free shades run on batteries and need no wiring. The system is a Fascia or an Open roll, because a Pocket would mean opening the ceiling.

How long do motorized shade batteries last?

It depends on the motor and how often the shade moves. Lutron publishes three to five years on D cells for its Palladiom wire-free shades. One industry guide gives six to twelve months per charge for rechargeable motors.

Do you shade high-rise condos?

Yes. The ceiling is already finished, so Fascia or Open roll is the normal system, and wide glass is priced as a large opening. Ask the building whether it sets rules for what shows from outside.

What does a Buckhead project cost?

Projects start at $15,000. A whole house of about 22 shaded openings usually lands at $27,000–42,000 installed, controls and programming included.

Get a price for your house.

Send plans or phone photos of the rooms. A priced design comes back in two business days.

Get a price for your house