Pocket, fascia or open roll
The system is how the shade meets the window, and it decides what you see when the shade is up. A pocket hides the roll in the ceiling. A fascia covers it with a slim metal strip inside the frame. An open roll leaves it in view on a machined bracket. A pocket has to be decided before drywall; the other two fit a finished house.
The three systems

A recess framed into the ceiling above the glass. The shade rolls up into it and a flap closes the slot.
- You see
- Nothing, until it moves
- Decide
- Before drywall
- Takes
- Sheer, privacy, blackout, dual

Fascia
A slim metal cover fixed inside the top of the window frame, finished to match the trim.
- You see
- One slim line at the top
- Decide
- Any time
- Takes
- Sheer, privacy, blackout, dual

Open roll
No cover at all. The roll sits on a machined bracket with no visible screws or wires.
- You see
- The roll and the bracket
- Decide
- Any time
- Takes
- Sheer and privacy
Which one for your house.
| Your house | What fits | Why |
|---|---|---|
| Being built, framing stage | Pocket, hardwired | The recess and the wire go in before drywall. This is the only stage where it is cheap. |
| Being remodeled, ceilings open | Pocket where the ceiling is open, fascia elsewhere | Rooms keep the same fabric and hem line with two systems. |
| Finished, traditional trim | Fascia, inside the frame | It sits in the depth of the casing and takes the trim color. |
| Finished, modern, plain walls | Open roll or fascia | The roll and bracket read as a detail, not as hardware to hide. |
| Bedroom that must be dark | Pocket or fascia, with side channels | An open roll leaves a gap at the top and has no channels. |

The hem bar.
The weight at the bottom of the fabric that keeps it flat. It can be wrapped in the same fabric so it disappears, or left as a slim metal bar in the hardware finish.
Across a wall of windows, every bar stops on one line.
Side channels
Slim tracks on the window frame. The edges of a blackout shade run inside them so no light shows at the sides.
Coupling
On a pair or a triple, shades sit side by side with a narrow gap and lower together on one command.
Finishes
Fascia, brackets, channels and hem bars come in white, black, aluminum, bronze and brass.
See fabric and finishQuestions owners ask
Can I get a pocket in a finished house?
Only by opening the ceiling above each window. Most owners of finished houses choose a fascia, which gives a clean top line with no construction.
How deep does my window frame need to be for an inside mount?
It depends on the system, and we check it from your photos. One large retailer's measuring guide asks for 3/4 inch of depth to mount inside the frame at all, and 2 1/4 to 3 3/4 inches for the shade to sit flush inside it. Shallower frames take an outside mount.
What should I tell my builder?
That the shades are motorized, which windows get them, and that the pockets and the low-voltage wire have to be in before drywall. The pre-wire guide lists it by construction stage.
Get a price for your house.
Send plans or phone photos of the rooms. A priced design comes back in two business days.
Get a price for your house