Motorized shades in Atlanta
Large houses in the Atlanta suburbs are mostly two-story traditional or transitional designs with separate rectangular windows in pairs and triples, one two-story foyer or great room, and one door group to the porch. A typical whole-house project covers about 22 shaded openings and costs $27,000–42,000 installed. Projects start at $15,000.
The houses and windows of metro Atlanta
North of the city, the house in this price band is usually a two-story traditional, European or transitional design. Its windows are separate rectangles, double-hung or casement, often joined in pairs and triples, with transoms where ceilings reach 10 feet. One foyer or great room rises two stories with stacked windows, and one door group opens to the porch. A "wall of windows" in an Atlanta listing usually means a row of tall framed units, not frameless glass. Builder survey data puts the average new luxury house at about 28.8 windows.
Mode Shades designs, makes to measure and installs motorized shades, which some people call motorized blinds or automated shades, in Alpharetta, Milton and Buckhead, and in Roswell, Johns Creek and Sandy Springs.
What we would put on those windows
| Window | Shade | System | Installed price |
|---|---|---|---|
| Bedroom double-hung | Blackout | Fascia | $1,095–1,495 |
| Kitchen or breakfast triple | Sheer | Fascia | $1,895–2,995 |
| Upper tier of a two-story room | Sheer | Fascia, hardwired | $1,895–2,995 |
| Door group to the porch | Sheer or Privacy | $1,895–2,995 | |
| Controls and programming | All shades | Keypad, phone, schedule | Included |
West sun, tree cover and new construction
A two-story great room that faces west takes low afternoon sun through both tiers of glass, and the upper tier is out of reach. Shades above about 10 feet should be hardwired, because a battery change up there needs a ladder or a lift. See two-story windows, transoms and arches.
A city study estimated Atlanta's tree cover at 47.9% for 2008. Trees can shade one side of a house and leave another in full sun, so fabric is chosen room by room. New construction is active in Alpharetta and Milton, and a house still in framing can be pre-wired before drywall.
How it works from here
- Send the plans, or phone photos of each room.
- A priced design comes back, window by window.
- We measure on site, make each shade to measure and install it.
Start here: get a price for your house.
Questions owners ask
How much do motorized shades cost for a whole house in Atlanta?
A house with about 22 shaded openings usually lands at $27,000–42,000 installed, and projects start at $15,000. We found no published Atlanta-specific price. One national franchise guide quotes $5,000–15,000 for an average three-bedroom home, which describes a smaller house and a lower product class.
Do I need hard-wiring for motors?
Not always. In a finished house, wire-free shades avoid opening walls. In a new build or a remodel, hardwired power means no batteries to change.
Can a shade cover an arched window?
A roller shade cannot follow a curve. The usual answer is to shade the rectangle below and leave the arch open.
Which Atlanta suburbs do you cover?
Alpharetta, Milton, Roswell, Johns Creek, Sandy Springs and Buckhead. The first step is the same everywhere: plans or photos, then a priced design.
