Motorized shades in Milton
Milton houses sit on large lots and many are custom builds with a two-story foyer, 10-foot main-level ceilings and a cathedral-ceiling great room. Because so many are new, shades are best planned before drywall, with pockets and hardwired power. A typical whole-house project of about 22 openings costs $27,000–42,000 installed. Projects start at $15,000.
The houses and windows of Milton
Milton became a city in 2006. It is known for horse farms, a rural character and large residential lots, and much of its land is agriculturally zoned. Where it meets Alpharetta, a local buyer guide puts lots at one to three acres and describes custom houses with larger footprints. Listings for new Milton houses mention two-story foyers, 10-foot main-level ceilings and cathedral ceilings. So the usual house has many framed rectangular windows, a few very tall ones, and one large door group to the porch.
Mode Shades shades whole houses in Milton and the rest of metro Atlanta with motorized shades, which some owners know as motorized blinds or automated shades.
What we would put on those windows
| Window | Shade | System | Installed price |
|---|---|---|---|
| Two-story foyer, upper windows | Sheer | Fascia, hardwired | $1,895–2,995 |
| Great room group under a cathedral ceiling | Sheer | $1,895–2,995 | |
| Primary bedroom | Dual | $1,795–2,495 | |
| Main-level windows, 10-foot ceiling | Privacy | Fascia | $895–1,295 |
| Controls and programming | Whole house | Keypad, phone, voice, schedule | Included |
A cathedral ceiling can put angled or arched glass high in the wall. A roller shade needs a level top, so that glass stays open and the rectangle below it is shaded.
Pre-wire while the walls are open
New construction is active in Milton, and a custom build is the easiest house to shade well. Before drywall, power can be run to every window head, and a Pocket can be framed into the ceiling so the roll is out of sight. The pre-wire guide has the list for your builder.
If the house is finished, wire-free power and a Fascia do the job without opening walls. The trade-offs are in hardwired vs battery. Either way, hardwire the foyer's upper windows: above about 10 feet, changing a battery means a ladder or a lift.
How it works from here
- Send the construction plans with the window schedule. For a finished house, phone photos are enough.
- A priced design comes back, opening by opening.
- Once the windows are in, we measure on site, make the shades to measure and install them.
Begin with the plans: get a price for your house.
Questions owners ask
When in the build should shades be planned?
Before drywall. Pockets are framed with the ceiling, and power is run to each window head while the walls are open.
Can you add motorized shades to a house that's already built?
Yes. Wire-free shades with a Fascia or an Open roll need no new wiring.
Do we need privacy shades on a large lot?
Distance helps by day. At night with the lights on, a sheer shade does not give privacy, so bedrooms and baths need Privacy, Blackout or Dual.
What does a whole Milton house cost?
About 22 shaded openings usually lands at $27,000–42,000 installed. Larger custom houses have more openings; the average new luxury house has about 28.8 windows. Projects start at $15,000.
