PRO sign-up Get a price

Smart glass cost: film or laminated?

Switchable privacy glass, which most people search for as smart film or privacy glass, runs about $50 to $200 per square foot installed. Film applied to existing glass sits at the low end. New laminated glass sits at the top and can pass $200. It switches glass from clear to frosted. It does not darken a room and it does not stop heat.

Updated November 18, 2026

What smart glass does and does not do

Smart glass is glass with a liquid crystal layer, called PDLC, that switches between clear and frosted. With power on, the crystals line up and the glass is clear. With power off, it is frosted. Most people search for it as smart film, privacy glass or smart tint. We call it privacy glass, because privacy is the one thing it does.

  • It does not darken a room. The frosted state still lets light through. One cost guide warns that silhouettes can stay visible close to a brightly lit panel.
  • It does not control heat. The same guide says energy savings should not be assumed from privacy switching alone.
  • It is not perfectly clear when on. Gauzy, a maker, publishes an average haze of 2.5% for its film.

Gauzy also states that its switchable glass can block 99% of UV rays. That is a maker's figure for its own product.

Bathroom glass wall switched to its frosted state
Illustration: a bathroom glass wall in its frosted state. Light still comes through.

Film on existing glass or new laminated glass

There are two ways to get it. With film, an adhesive PDLC sheet goes on the room side of glass you already have, and a thin wire runs from its edge to a low-voltage power supply. With laminated glass, the PDLC layer is sealed between two panes at the factory, so the glass itself is ordered new.

PointFilm on existing glassNew laminated glass
Published cost per square foot$70 to $150 installed (national planning range); $20 to $60 installed (one Miami installer); $70 film plus $30 application (one vendor)$78 to $145 or more for the glass before labor; $145 plus $50 to $100 glazing labor (one vendor); over $200 to $300 installed (one Miami installer)
Fits whenThe glass is staying, as in a finished houseNew construction, or a remodel where the glass is being replaced
Published lifeTen years or more (an installer's claim)Decades (an installer's claim; we found no test data)
Weak pointsExposed edges and electrical contacts; bubbles if applied badlyCost, and the old glass has to come out

The published film prices disagree by a factor of two or more, and none is specific to a house in Atlanta or Miami. Our planning range is $50 to $200 per square foot installed, with film at the low end and laminated glass at the top.

What common panels cost at that range

Example panelSizeAreaAt $50 to $200 per square foot
Door sidelight1 ft by 7 ft7 sq ft$350 to $1,400
Bathroom window3 ft by 5 ft15 sq ft$750 to $3,000
Glass wall between bath and bedroom5 ft by 7 ft35 sq ft$1,750 to $7,000
Sliding door, both panels6 ft by 8 ft48 sq ft$2,400 to $9,600

These figures are area times our range, a first estimate before a quote. The last row shows the limit: a motorized shade for the same sliding door is $1,895 to $2,995 installed in our range, and it handles glare as well.

Power draw, outages and lifespan

Published power draw is small: about 0.28 to 0.46 watts per square foot while the glass is clear, and nothing while it is frosted. That figure is a maker's specification quoted by a cost guide. At that rate a 35 square foot glass wall draws about 10 to 16 watts when clear.

In a power outage, ordinary PDLC goes frosted. For a bathroom that is the right way to fail.

Lifespan is thinly sourced. A Miami film installer says quality film lasts ten years or more. Gauzy lists more than 18 million on and off cycles for its film. We found no independent lifespan figure for laminated privacy glass in a house, so we do not quote one. Ask for the warranty in writing.

Where privacy glass makes sense at home

  • Baths. A window beside a tub, or a glass wall between bath and bedroom. It frosts on demand, and there is no fabric in a wet room.
  • Street-side glass. Front door glass, sidelights, a stair window that faces the road. These are places where you want daylight all day and privacy at the push of a button.
  • Doors. Glass in a door that swings, where a shade would move with the door. The guide to shades for sliding and French doors covers the shade options.
  • Shaped glass. A roller shade cannot follow an arched top. Film can be trimmed to the glass, so ask the installer about arches.

Where a shade is the better answer

  • Bedrooms. Sleep needs darkness, and frosted glass still glows. Use a blackout shade.
  • Glare and heat. A solar shade cuts glare and keeps the view. Frosted glass removes the view and does neither job.
  • Large areas. Glass is priced by the square foot, so the cost climbs with size. A shade for a large opening does not climb the same way.
  • A daytime view with night privacy. Frosted glass gives privacy by giving up the view. A dual shade keeps both. See the fabric guide.

Mode Shades offers privacy glass as an add-on to a shade project, not as a replacement for shades. Mark the glass you have in mind on the plans or photos you send to get a price.

Questions owners ask

What is PDLC?

Polymer dispersed liquid crystal. It is the layer inside smart film and smart glass that turns clear when powered and frosted when not.

How long does smart privacy film last?

One Miami installer says ten years or more for quality film. That is a seller's claim, so ask for the warranty in writing.

Does smart film work during a power outage?

No. Ordinary PDLC loses its clear state without power and stays frosted until power returns, so the glass stays private.

Can smart film be installed on existing glass?

Yes. That is what film is for. It is applied to the room side of the glass and wired at the edge to a low-voltage power supply.

Can I install switchable film myself?

Some suppliers sell film cut to size for self-install. One cost guide warns about bubbles, damaged electrical contacts and unsealed edges.

Get a price for your house.

Send plans or phone photos of the rooms. A priced design comes back in two business days.

Get a price for your house